Model osciloscop: WavePro 735 Zi
Cel mai rapid şi mai eficient
Capacitate de a răspunde la variaţia parametrilor de intrare foarte rapidă (X-Stream II)
Capacitate de memorare foarte mare
Cel mai bun transfer de date (opţiunea LSIB, până la 500 Mpts/s)
Memorie de analiză 128 Mpt
Capabilitate înaltă de debug
Cele mai multe triggere de intrare şi decodara serală
WaveScan – funcţie de căutare avansată
Canale: 4
Bandă de frecvenţă: 50Ω / 3.5 GHz; 1 MΩ / 500 MHz max
Rată eşantionare (4 Canale): 20 GS/s
Rată eşantionare (2 Canale): 40 GS/s
Rată eşantionare ( 1 Canal): 40 GS/s
Memorie (Standard): 10 Mpts (20 Mpts/Ch interleaved)
Memorie (Max): Până la 128 Mpts/Ch (256 Mpts/Ch interleaved)
Impedanţă de intrare: 1 MΩ, 50 Ω
DISPLAY
Dimensiune Display: 15.4″
Tip Display: WXGA
Rezoluţie: 1280 x 768 pixeli
Touch Screen: DA
Fast Display: WaveStreamTM
Fast Display Rată Update:
WaveStream până la 2500 forme de undă/sec
(până la 1,250,000 forme de undă/sec în mod sequence)
Nivele de intensitate Fast Display: 256
Fast Display rată de eşantionare maximă: 40 GS/s
Fast Display Caracteristici:
Very Nice
ON/OFF, selectare color sau scală analogică, intensitate ajustabilă %.
TRIGGERARE
Triggerare Standard Analogică: Edge, Glitch, Width, Runt, Pattern, State, Transition Time (Slew Rate), Window, Video (incl. HDTV), Dropout, Interval, Qualified (A-B), QualFirst (A-B,B,B…)
Automatic Trigger Sequencer:
TriggerScanTM
Sequence >100 triggers of any kind.
Automatic “training” to simplify trigger setup.
Rată Max Analog Trigger: >1,250,000 wfms/sec (sequence mode)
Analog Trigger: DC, AC, HF REJ, LF REJ
Bandă de frecvenţă Edge Trigger: 3.5 GHz
Sensibilitate Edge Trigger:
DC, AC, LFRej Coupled
1.0 div from DC to 200MHz
1.5 div at 1.75 GHz
2.0 div at 3.5 GHz
Trigger Jitter: 1.0 ps rms (typical)
Domeniu de timp SMART Trigger:
250 ps to 20 s (Width, Glitch)
1 ns to 20 s (altele)
Acurateţe SMART Trigger: ±20% (typical)
SMART Trigger Minimum Timing
(Pulse Width) Requirements:
Width = 250 ps
Glitch = 250 ps
Altele = 1 ns
Trigger Holdoff Range: 1 ns to 20 s
Serial Triggering (Low Speed):
I2C (Optional),
SPI (Optional),
UART/RS-232 (Optional)
LIN (Optional)
CAN (Internal, Optional)
FlexRay Basic (Optional)
Serial Clock Source: Any Channel, Aux In, Digital (digital through MS-xxx)
Serial Data Source: Any Channel, Aux In, Digital (digital through MS-xxx)
Data/Payload Setup:
=, >, >=, <, <=, <>
FlexRay is ID trigger only
SPI has no conditional data setup
Serial Triggering
(High Speed):
80 bits
NRZ and 8B10B
50 Mb/s to 1.25 GBd
Comm Data Source: Channel 4 only
Serial Coding: NRZ or 8b10b
Serial Data Source: Channel 4 only
Clock Recovery Jitter: 1 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density
Serial Trigger Position Accuracy: <0.1 UI
Minimum Signal Amplitude for Clock Recovery:
2 division p-p
10 Mb/s to 3.125 Gb/s
Hardware Clock Recovery System:
PLL Loop BW = Fbaud/5500
10 Mb/s to 1.25 Gb/s (typical)
Software Qualifier (Trigger):
WaveScan (standard):
Measurements (>20)
Edge
Non-Monotonic
Runt
Altele: Qualify Any Analog Trigger cu opţiunea MS-XX Digital Pattern
Lasa un raspuns